Post Types And Uses

Post Types And Uses

U-Channel Posts have predrilled holes that are 1 inch apart.  This post is typically used in conjunction with road signage.  However, they can be useful for other types of signage as well.  The most typical length is 8’ and they come in galvanized or green and 1.12# per foot or 2# per foot.  We wouldn’t suggest using these for snowmobile trails, ATV trails, dirt bike trails ect. as they could injure someone who runs into them.

Our Delineator posts are made from recycled & recyclable thermoplastic polymers.  These posts will not rot or rust and will not splinter like fiberglass.  They are flexible so if they are impacted they will not cause as much damage.  The most common use is for the application of 4” X 4” decals.  The posts themselves are 4” wide by 66” tall.  They are available in soft or hard soil with the corresponding anchors making them more difficult to pull out of the ground.  The anchors are sold separately.

Our Snow Poles are highly visible, lightweight, durable & impact resistant.  They have a honeycomb cross-section, which will allow the poles to bend and snap back.  Small signs & directional arrows can be attached to these poles.  The best application is in areas where they may be impacted and you want to limit damage or injury.  For example ski trails, racecourses, event markers ect.

Our bass wood stakes are 1” X 1” and 48” long.  They are typically used for temporary signage.  We have a series of plastic special event signs that these poles work perfectly for.  These poles are light and easy to handle.  In addition, they can be easily stapled into for sign attachment.